Analytical instruments for pH, ORP, EC; TDS etc.
Manufacturer of Instruments to measure pH, ORP, TDS, Conductivity, Free & Total Chlorine, Iron, Ammonia, Phosphates, Chloride, Iodine, Turbidity etc.
These meters range from pocket size to portable, to bench top, and can be used both in Labs & for field applications.
These meters range from pocket size to portable, to bench top, and can be used both in Labs & for field applications.
Innovations & solutions
Products
Handy Photometers
The revolutionary new range of Milwaukee handy photometersare compact and easy to use, have a modern design, and measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate (MW12); Iodine (MW13) and Iron (MW14). Within a few minutes you can get the required result on the LCD and the meter automatically turns off after 2 minutes in order to save the battery life.
Digital Refractometers for Seawater Measurements
The MA887 refractometer is an optical device that is simple and quick to use. Samples are measured after a simple user calibration with distilled or deionized water. Within seconds, the refractive index and temperature are measured and converted into one of three popular measurement units; Practical Salinity Units (PSU), Salinity in parts per thousand (ppt), or Specific Gravity (S.G. (20/20)).
MC730 pH Controller and Dosing Pump
Control the pH of your reservoir AUTOMATICALLY!
Control the pH of your reservoir AUTOMATICALLY!
The MC122 pH controller and dosing pump (MP815) provides fully automated pH control of aqueous solutions. It has been specifically designed to control the pH in the reservoir The small and precise flow of the peristaltic pump allows you to maintain ideal pH values in your tank.
After selecting the desired pH setting from 5.5 to 9.5 pH, the pH controller measures the pH value of the solution and automatically adds pH adjustment (acid or alkaline) to change the liquid’s pH to the selected level.
After selecting the desired pH setting from 5.5 to 9.5 pH, the pH controller measures the pH value of the solution and automatically adds pH adjustment (acid or alkaline) to change the liquid’s pH to the selected level.