We design and produce pumps and fluidic solutions
Fluid-o-Tech is an Italian company leader in the design and manufacture of pumps for pressurization and transfer of fluids with about 200 collaborators, besides its main establishment in Corsico, Italy, is present in the U.S.A, both on the East and West Coast, in Japan and in China.
At the core of its work Fluid-o-Tech has chosen to put know how, technological development and continuous improvement, building relationships of trust with its employees, suppliers and customers.
At the core of its work Fluid-o-Tech has chosen to put know how, technological development and continuous improvement, building relationships of trust with its employees, suppliers and customers.
Innovations & solutions
Products
show more >>
PO4000
The rotary vane pump 4000 series
The rotary vane pump 4000 series
The 4000 series rotary vane pumps, available in 7 different displacements, are the largest Rotoflow high technology volumetric pumps.
The pump housing, the rotor and every metallic component are in AISI 303 stainless. AISI 316 is also available;
The pumping chamber and the vanes are in high impact carbon graphite.
The self-lubricating property of polished;
stainless steel and carbon graphite makes this pump well suited for water and water based solutions.
The pump housing, the rotor and every metallic component are in AISI 303 stainless. AISI 316 is also available;
The pumping chamber and the vanes are in high impact carbon graphite.
The self-lubricating property of polished;
stainless steel and carbon graphite makes this pump well suited for water and water based solutions.
Peristaltic pumps TP30
The Fluid-o-Tech peristaltic pump technology offer
The Fluid-o-Tech peristaltic pump technology offer
Key to its design are the elimination of the traditional gear box and a fast tube change capability enabling tubing or complete pumps to be replaced very quickly with minimal skills or tools.
The unit is available in a range of drives including brush and brushless DC and can be stacked for multi-channel operation off a single drive for enhanced flow or delivery of discrete fluid streams.
Fluid-o-Tech® TP30 series offer outstanding suction performance and repeatability characteristics, lending themselves wel
The unit is available in a range of drives including brush and brushless DC and can be stacked for multi-channel operation off a single drive for enhanced flow or delivery of discrete fluid streams.
Fluid-o-Tech® TP30 series offer outstanding suction performance and repeatability characteristics, lending themselves wel
PO 500-1000 series
Dircet drive rotary vane pump PO 500-1000 series
Dircet drive rotary vane pump PO 500-1000 series
The PO 500-1000 series positive displacement rotary vane pumps are available with brass or stainless steel housing with ½” GAS or NPT ports and internal relief valve. The nominal flow rates range between 500 and 1000 l/h at 1450 rpm. Any pumps of this series may be operated at 1725 rpm as well and will provide about 20% more capacity, with a maximum of 320 GPH. Maximum discharge pressure is 230 psi (16 bar). This series mounts directly to widely available NEMA 48Y motor by means of a v-band clamp and to M71
TH 500-1000
Magnet drive rotary vane pump TH 500-1000 series
Magnet drive rotary vane pump TH 500-1000 series
The TH 500-1000 series positive displacement rotary vane pumps are available with brass or stainless steel housings, with 1/2” GAS or NPT ports and internal relief valve. The nominal flow rates range between 500 and 1000 l/h at 1450 rpm. These pumps may be operated up to 1725 rpm and will provide flow proportional to speed, with a maximum of 320 GPH. Pump discharge pressure is up to a maximum of 14 bar (200 psi).The seal-less, magnetic coupling to motor provides extra reliability and longer service life. Th
GA series
Direct drive rotary vane pump-motor unit GA series
Direct drive rotary vane pump-motor unit GA series
The GA series are the smallest size Fluid-o-Tech rotary vane pumps.The standard configuration includes a brush or brushless DC motor, but AC motors are available as well upon request. The internal parts are in stainless steel and carbon graphite, whereas the housing is in stainless steel. The nominal flow rates range between 30 (8 GPH) and 100 l/h (26 GPH) at 1450 rpm, however the speed may be changed between 500 and 3000 rpm and flow rate will vary proportionally to speed. Pump discharge pressure is up to