Industrial water and process treatment solutions
Kurita's water treatment technologies are assisting businesses globally in conserving resources, enhancing plant efficiency, and promoting environmental sustainability. Our cutting-edge solutions effectively address water management challenges, promote sustainable energy usage, reduce waste, and advance industrial production technologies. Ensuring ethical business practices with a positive impact on the world is our topmost priority that demands our daily attention.
Innovations & solutions
Cooling tower blowdown recovery system
Kurita´s cooling tower blowdown recovery system
The Kurita Group provides comprehensive solutions to reduce the amount of water intake used in the industrial processes, which would have been lost otherwise through the discharge of the water. This is achieved by integrating a variety of technologies, products, and services in three business areas as water treatment chemicals, water treatment facilities and IoT services.
Kurita´s cooling tower blowdown recovery system
The Kurita Group provides comprehensive solutions to reduce the amount of water intake used in the industrial processes, which would have been lost otherwise through the discharge of the water. This is achieved by integrating a variety of technologies, products, and services in three business areas as water treatment chemicals, water treatment facilities and IoT services.
Category: Water Supply (incl. Point of use)
Products
show more >>
S.sensing® CS
Online monitoring optimises wastewater treatment
Online monitoring optimises wastewater treatment
Wastewater automation system for real-time monitoring & dosing control:
Kurita’s S.sensing® CS technology offers an innovative equipment to control the product dosage in industrial wastewater treatment systems. This state of the art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs.
Kurita’s S.sensing® CS technology offers an innovative equipment to control the product dosage in industrial wastewater treatment systems. This state of the art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs.
SSK System
Kurita’s Aeration Technology for Paper Industry
Kurita’s Aeration Technology for Paper Industry
SSK is an aeration and biocide combined technology. The existence of plenty of bacteria in the system means that oxygen is consumed, the oxidation reduction potential exhibits a negative value, and the entire system is anaerobic. Traditionally, a slime layer is generated in the stagnant part but with Kurita´s technology, the stagnation part disappears.
Kuristuck B800
Paint booth treatment
Paint booth treatment
Kuristuck is an innovative technology for detackification and coagulation for solvent and water-based paints.
In paint booth systems, different body and spare parts from automotive, appliance, electronics, plastics and other industries are coated by using one or multiple layers of paints. The main goal of the paint booth treatment is to remove as much overspray paint as possible for successful operations. Our Kuristuck technology meets this requirements.
In paint booth systems, different body and spare parts from automotive, appliance, electronics, plastics and other industries are coated by using one or multiple layers of paints. The main goal of the paint booth treatment is to remove as much overspray paint as possible for successful operations. Our Kuristuck technology meets this requirements.
Fracta
Predict leakage and breaks in water pipelines
Predict leakage and breaks in water pipelines
Fracta is a cutting edge condition assessment solution that uses Machine Learning to assess the condition and risk of drinking water distribution mains. The Fracta solution shifts asset operation and management from reaction to prevention. It helps avoid disruptive water main breaks, lower non-revenue water (NRW), better target leak detection, valve maintenance efforts, and educate key stakeholders on the true cost and risk of their aging water main infrastructure.
BOSS
Block Off Severe Scale in geothermal
Block Off Severe Scale in geothermal
Chemical treatment is one of the essential applications of all types of geothermal utilization. There are different approaches to treatment programs, such as avoiding damages and performance enhancement techniques. Kurita Geothermal Technology products are accordant with the co-precipitation mechanism of several minerals in geothermal flow.
Do you want to try a new concept to increase the efficiency of your process?
BOSS: Block Off Severe Scale in geothermal
Prevent severe scaling in surface facilities
Do you want to try a new concept to increase the efficiency of your process?
BOSS: Block Off Severe Scale in geothermal
Prevent severe scaling in surface facilities
Corrsave® 100
Corrosion inhibitor
Corrosion inhibitor
Kurita, in his continuous commitment for sustainable treatments, has developed Corrsave® 100, an innovative new molecule that provides corrosion inhibition and hardness stabilization for water systems with special focus on treatments where low P (Phosphorous) contribution and improved biodegradability is a demand.
Vitec®
Scale inhibition technology
Scale inhibition technology
Scaling within RO systems is a serious matter, not only does it drastically reduce system performance it can also lead to irreversible membrane damage. The Avista Vitec® antiscalant line inhibits scale while also dispersing colloidal particles. The inhibition and dispersant properties of Vitec products help extend system run times, reduce cleaning frequency, and increase the productive life of RO elements.
RoClean®
Membrane Cleaners
Membrane Cleaners
All reverse osmosis (RO) systems foul over time. Symptoms of fouling include a decrease in normalized permeate flow, an increase in salt passage, or an increase in differential pressure. Severe fouling may also cause irreversible damage to membranes, making effective cleaning difficult or impossible. Avista RoClean® cleaners provide efficient and cost-effective removal of many different types of foulant or scale. All products are membrane compatible
ACF Technology
Prevention of fouling and corrosion
Prevention of fouling and corrosion
The new ACF (Ammonium Chloride Free) technology uses additives that are chemical liquid formulations based on a very strong organic base. It prevents salt fouling and corrosion in crude distillation units, FCC units, hydrotreaters, hydrocrackers, reformer units and other process equipment, where such disturbances are observed regularly.
Cetamine®
Energy savings for your boiling system
Energy savings for your boiling system
Kurita’s comprehensive Cetamine® Technology provides excellent protection against corrosion in boiler systems. Composed of film-forming substances, Cetamine creates a hydrophobic protective film acting as a barrier between water and metal, effectively inhibiting corrosion and scaling.
As an all-organic treatment program, Cetamine® allows optimized blow-down rates with higher cycles of concentration leading to significant lower fresh make-up water consumption, savings in energy and reduction of CO2
As an all-organic treatment program, Cetamine® allows optimized blow-down rates with higher cycles of concentration leading to significant lower fresh make-up water consumption, savings in energy and reduction of CO2
DReeM Polymer®
Awarded silica and hardness removal polymer
Awarded silica and hardness removal polymer
DReeM Polymer® is Kurita’s awarded Dispersion Removal effect Management Polymer for steam generators and boiler systems.
The multi-functional properties of DReeM Polymer® keep heated surfaces in boiler systems free of scale and remove existing hardness and silica deposits from system surfaces during normal boiler operation. Clean heat transfer surfaces will directly improve boiler efficiency leading to energy savings and a significant reduction in carbon dioxide emissions.
The multi-functional properties of DReeM Polymer® keep heated surfaces in boiler systems free of scale and remove existing hardness and silica deposits from system surfaces during normal boiler operation. Clean heat transfer surfaces will directly improve boiler efficiency leading to energy savings and a significant reduction in carbon dioxide emissions.
Kurita Dropwise Technology
Boosts heat transfer efficiency in heat exchangers
Boosts heat transfer efficiency in heat exchangers
The product is dosed continuously into the steam line in front of the target device creating a water repellent film on the surfaces. Increasing the water repellency greatly improves heat transfer efficiency, which helps to optimise productivity. At the same time the steam consumption is reduced leading to less fuel consumption and cutting down costs for water and energy.
FReE Technology
Online Cooling System Cleaning Technology
Online Cooling System Cleaning Technology
FReE is Kurita's Fouling Removal Efficiency Program and increases heat transfer of your cooling system without plant shutdowns. A total cleaning is performed during operation, without being corrosive and with no generation of waste. We are committed to developing solutions which help both our customers in an environmentally friendly approach.
Kuriverter® IK
Slime control agent for membrane systems
Slime control agent for membrane systems
Kuriverter® IK-110 removes biofilm from the membrane’s surface while preventing future bio growth. Kuriverter® IK-220 is an enhanced formula for deeper biofilm penetration at
lower doses.
Kuriverter® chemicals are an effective way to maintain system water quality and quantity, extend time between cleanings, and reduce energy consumption.
lower doses.
Kuriverter® chemicals are an effective way to maintain system water quality and quantity, extend time between cleanings, and reduce energy consumption.
Video
show more >>
Kuriverter® IK biofouling control solutions
Cetamine® Customer Success Story
Fracta | Monitoring Kassel's water mains network
Kurita Dropwise Technology
Presentation
Multimedia
hallo
hallo
hallo
hallo
hallo