Measurement Instrumentation Manufacturers
Pulsar Process Measurement are British manufacturers and suppliers of non-contacting ultrasonic and radar level, volume, open channel flow, pipe flow, sludge blanket level measurement and pump control instrumentation. Their products are used in a wide variety of industries and applications worldwide.
New products
Products
show more >>
MicroFlow
Non-contacting Area Velocity Flow Meter for Open C
Non-contacting Area Velocity Flow Meter for Open C
MicroFlow delivers accurate and repeatable velocity flow measurement, either as a stand-alone device or as part of a complete area velocity flow meter system.
Velocity x area calculation using MicroFlow provides a cost-effective flow measurement option compared to the installation of a primary measurement device, such as a flume, and provides a viable alternative where the hydraulics of the site do not allow for a restriction in the channel.
Velocity x area calculation using MicroFlow provides a cost-effective flow measurement option compared to the installation of a primary measurement device, such as a flume, and provides a viable alternative where the hydraulics of the site do not allow for a restriction in the channel.
MicroFlow-i
Non-Contacting Loop Powered Liquid Velocity Sensor
Non-Contacting Loop Powered Liquid Velocity Sensor
Pulsar’s MicroFlow-i delivers accurate, repeatable velocity measurement for liquid flow, either as an individual sensor or by providing HART communication protocol or a 4-20mA loop powered signal into a system.
MicroFlow-i's extremely low power consumption makes it the ideal velocity solution for sewerage network monitoring, spill monitoring, combined sewer overflows (CSO), sanitary sewer overflows (SSO), Event Duration Monitoring (EDM) and all remote installations where mains power is unavailable.
It's lig
MicroFlow-i's extremely low power consumption makes it the ideal velocity solution for sewerage network monitoring, spill monitoring, combined sewer overflows (CSO), sanitary sewer overflows (SSO), Event Duration Monitoring (EDM) and all remote installations where mains power is unavailable.
It's lig
Flow Pulse®
Non-invasive Flow Monitor
Non-invasive Flow Monitor
Flow Pulse is a unique, non-invasive flow monitor that clamps to the outside of a pipe and is simply secured with a screwdriver. Flow Pulse offers you exceptional repeatability at a fraction of the cost of an equivalent magflow meter. It can reliably monitor flow across a variety of pipe materials including rigid plastic, stainless steel, cast iron and even corrugated pipes.
Sludge Finder 2
Maintenance-free sludge blanket level measurement
Maintenance-free sludge blanket level measurement
Pulsar's Sludge Finder 2 is a versatile and reliable solution to measuring interface levels in primary or secondary settlement tanks and Sequencing Batch Reactor (SBR) systems. A self-cleaning transducer removes the need for regular inspection.
Programming Sludge Finder 2 is simple, all you need to do is enter the operating parameters via a menu driven operator interface and then Sludge Finder 2 automatically tracks to the blanket interface using proven echo processing techniques.
Programming Sludge Finder 2 is simple, all you need to do is enter the operating parameters via a menu driven operator interface and then Sludge Finder 2 automatically tracks to the blanket interface using proven echo processing techniques.
Blackbox Controller Range
Simple level measurement
Simple level measurement
Pulsar's Blackbox Controller range offers compact low-cost intelligent controllers for non-contacting level measurement. Each controller offers different features offering you the perfect choice for your application.
All operate with all Pulsar dB transducers up to 40m (130ft) range and within solids, powders and liquids applications.
All operate with all Pulsar dB transducers up to 40m (130ft) range and within solids, powders and liquids applications.
Ultra Controller Range
3 controllers in one
3 controllers in one
The Ultra Controller Range provides reliable non-contacting ultrasonic level/volume measurement, pump control and open channel flow measurement within one unit. Ultra 3 (3 relays), Ultra 5 (5 relays) and UltraTWIN (two channels) all benefit from Pulsar's DATEM, advanced processing software, for reliable measurement.
IMP Range
Compact, low-profile level measurement
Compact, low-profile level measurement
IMP can be used wherever you need reliable non-contacting ultrasonic level measurement and digital echo processing. Perfect for slurries or liquids. Available in 3m, 6m and 10m range versions and each can be wired for 2-wire and 3-wire operation.
Also available in Lite and I.S. versions.
Also available in Lite and I.S. versions.
dBi Intelligent Transducers Range
Self-contained, intelligent measurement
Self-contained, intelligent measurement
Pulsar's dBi Intelligent Transducer Series, with HART (4-20mA) or Profibus PA communication protocols, are a range of self-contained, intelligent non-contacting ultrasonic level measurement transducers that make plant integration simple. Four range choices are available with either 3m, 6m, 10m or 15m range (10ft, 20ft, 33ft or 49ft).
FlowCERT & FlowCERT Lite
Most accurate open channel flow measurement
Most accurate open channel flow measurement
Pulsar's FlowCERT system gives you everything you need for the industry's highest accuracy non-contacting ultrasonic measurement of open channel flows. Designed for flumes and weirs, FlowCERT gives temperature-independent, reliable measurement and logging facilities.
Pulsar Guard 2010
Non-invasive solids flow monitor
Non-invasive solids flow monitor
For use in applications such as: Burst filter bag detection; Impending blockages detection; Flow and no flow of solids detection; Valve leakage detection; and detecting 'Bridging' and 'Rat-holing' in silos. The Pulsar Guard 2010 sensor detects structure borne acoustic signals caused by the movement of material. The sensor is fastened to the outside of the structure, and its high frequency detection allows it to be used in environments where there is a high degree of machinery or process noise, without inter
Zenith & Quantum Range
Superior Pumping Station Control
Superior Pumping Station Control
Pulsar's Zenith & Quantum pump station controllers allow users to introduce advanced and sophisticated control functions to pumping station control regimes without the need for additional PLC programming. They provide alarms, including a unique alarm warning of 'time to spill' in critical area, and reset tripped pumps automatically.
dB Transducer Range
Measurement from 0m to 50m
Measurement from 0m to 50m
The Pulsar dB Transducer Series are non-contacting ultrasonic transducers that can measure level in a wide range of liquids, powders and solids as well as open channel flow applications. The dB Transducers have a compact, low power transducer design that can be I.S. certified and uses standard interconnecting cables, yet produces extremely high acoustic power to give exceptional results in a wide variety of challenging situations. All transducers also have flammable atmosphere approval as standard. dB Trans